 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PRODUCT BRIEF 10 Gigabit/s Transceiver with XAUI Interface The TenGiPHY-L is a single chip transceiver IC for 10 Gbit/s Ethernet and Fibre Channel connectivity. It offers a serial, full duplex 10 Gbit/s, XFI compliant interface to optical components or to a serial fiber-optic module (XFP). The integrated CDR and CMU operate at a data rate of 10.3125 or 10.51875 Gbit/s. The TenGiPHY-L provides the XGXS, PCS and PMA sublayers of the 10 Gbit/s Ethernet and Fibre Channel standards. At the system side, a quad serial XAUI interface connects the TenGiPHY-L to the upper layers. The networking system can control the chip via a narrow-width MDIO interface by writing and reading its control and status registers. Applications Fiber optic modules according to the XENPAK multi-source agreement 10 Gbit/s Ethernet line cards 10 Gbit/s Fibre Channel line and NIC cards Terabit Routers Features Complete 10 Gbit/s Ethernet and Fibre Channel PHY device supporting LAN applications Complies with IEEE 802.3ae Complies with ANSI 1413-D Compliant to XENPAK multisource agreement Embedded Controller allows for control and tuning of the PMDs via analog interfaces Clock & data recovery and clock multiplying unit without external loop filter components Supports various clocking modes based on external reference clocks, loop- and external timing Integrated bit error rate tester (BERT) usable for multiple atspeed diagnostic scenarios Includes the XGXS, PCS, and PMA sublayers of the OSI protocol stack Synchronization and de-skewing of XAUI lanes Performs 8B/10B (de-)coding required for the XGXS sublayer Various loop back modes for system debugging UPF 01012 Provides access to EPROM via IC interface according to XENPAK requirements; automatic EPROM download on power-up Power-efficient design: <1.3W @ 1.3V Interfaces Full duplex, XFI compliant serial CML line interface for data rates between 10.3 and 10.5 Gbit/s Quad serial Gbit/s XAUI interface with data rates between 3.1 and 3.2 Gbit/s MDIO interface IC interface XENPAK diagnostic interface providing eight 12-bit ADCs and four 10-bit DACs IEEE 1149.1 JTAG boundary scan interface UPF 01012 TenGiPHY-L Never stop thinking. PRODUCT BRIEF Block Diagram JTAG Interface JTAG Interface Sync & Sync & Deskew Deskew XAUI Interface 4x 3.125 Gbit/s 10 Serial Line Interface 10 G G Serial Line Interface System Interface BERT BERT Clock Clock Multiplier Multiplier Unit Unit 8B/10B 8B/10B CODEC CODEC 64B/66B 64B/66B CODEC CODEC Scrambler Scrambler Line Interface 10.3125 Gb/s Clock & Clock & Data Data Recovery Recovery Controller Controller IC IC Interface Interface XENPAK XENPAK Diagnostic Diagnostic MDIO/MDC MDIO/MDC Interface Interface Alarm Alarm Interface Interface Documentation and Support Package Data Sheet Hardware Evaluation System includes mother- and transponder board WINEASY Software for MS Windows with graphical user interface Application Assistant: Configuration Software for MS Windows for device initialization Package P-FCHBGA-177-1 Type TenGiPHY-L Sales Code UPF 01012 Application Example UPF 01012 Clock Laser CMU LDD 10Gbps PCS Data MAC XAUI Interface XGXS CDR LA TIA Photodiode Optical Module Management Interface IC Interface EPROM (optional) 10G Ethernet / Fibre Channel Line Card How to reach us: http://www.infineon.com Published by Infineon Technologies AG, Bereich Kommunikation, St.-Martin-Strasse 53, D-81541 Munchen (c) Infineon Technologies AG 2002. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as warranted characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Infineon Technologies is an approved CECC manufacturer. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office in Germany or our Infineon Technologies Representatives worldwide. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Printed in Germany PS 0502.2 Published by Infineon Technologies AG |
Price & Availability of UPF01012
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |